TL;DR
Get cleaning gear delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
Hunker reports that Malco’s TS1 TurboShear drill attachment, designed for metal, can also cut vinyl siding and may be easier to use than a utility knife for curves and repeated cuts. The $69.98 attachment has limitations, including thicker vinyl and some ribbed panels; the report does not present independent testing.
Hunker reports that Malco’s TS1 TurboShear, a $69.98 drill attachment made for cutting metal, can also cut vinyl siding and may be a more practical option than a utility knife for curved or repeated cuts. The tool is not suited to every vinyl job: the article says it can struggle with ribbed panels and is not specified for thicker materials such as vinyl plank flooring.
The TS1 attaches to a drill or impact driver and weighs 1.75 pounds, according to Hunker. The report says the shears can cut vinyl siding without chipping, including in cold weather, and can start a cut in a hole as small as one-half inch. Those features may help with openings and shaped cuts that are difficult to make cleanly with a knife.
Hunker contrasts the attachment with a utility knife, which it describes as effective for straight cuts made against a straight edge but less suitable for curves. The report also says a knife may be pulled off course by the siding’s embossed grain and takes longer than powered shears. The article cites Home Depot ratings of 4.1 stars from 185 reviews, with 81% of purchasers recommending the TS1. Those retailer ratings are customer feedback, not controlled performance testing.
The attachment has operational limits. Hunker says Malco specifies the TS1 for straight and leftward cuts; users can flip the workpiece to make a cut from the other direction. The article reports that both hands are needed unless a drill clamp is used, and that the TS1 can have trouble with corrugated or ribbed siding. Malco’s separate clamp costs about $30, according to the report. The cutting jaws also wear over time, particularly with metal, though replacement blades are available.
Where the TS1 Can Save Time
For homeowners cutting vinyl siding as part of a repair or installation, the attachment offers a way to use a drill they may already own rather than relying only on hand cuts. Its reported ability to make curves and cuts around openings could be useful where a straight-edge knife cut is awkward. That is a practical benefit, not proof that the tool is the best choice for every project.
Price and frequency of use matter. At $69.98, the TS1 costs less than many standalone power shears, but it still requires a compatible drill or impact driver and may need a separately purchased clamp. Hunker’s conclusion is that its value depends on how often a DIYer needs powered shears and what materials they cut. A tool used occasionally for flat siding may be a different purchase decision from one used often on complex cuts or corrugated material.
Products Worth Considering
eufy Security Video Doorbell E340, Dual Cameras, 2K FHD, 8GB Local Storage
Samsung The Frame Pro LS03HW 65-inch Neo QLED TV with 27-Month Axiom Care
Samsung 65-Inch The Frame Pro Neo QLED 4K TV (2026) Bundle with Modern Brown Bezel, HDMI Cables, and Home Theater Guide
As an affiliate, we earn on qualifying purchases.
The TS1 Versus Vinyl-Specific Shears
The TS1 is a metal-cutting attachment repurposed for vinyl siding, rather than a tool designed specifically for that material. Hunker says typical vinyl siding is about 0.035 to 0.055 inches thick or more, while even the thinnest vinyl plank flooring is about 2 millimeters, or 0.079 inches. The article says that flooring thickness is beyond the TS1’s stated capacity, so its siding performance should not be taken as evidence that it can cut vinyl flooring.
Malco also sells the TSV1 Vinyl Siding Shears, which Hunker describes as purpose-built for siding, with a longer cut and jaws suited to thicker sections and corrugations. The report puts its price between $210 and $267 and says it includes a telescoping drill clamp. Other drill attachments are also available: Hunker names DeWalt, Skyshalo and Vevor options, while cautioning that some have few customer ratings. It also cites standalone shears at a wide range of prices, from a $42.72 corded Wen to an $819 corded Makita.
“The TS1 is suitable for most vinyl siding cuts, but won’t perform properly on thicker materials, like cutting vinyl plank flooring.”
— Hunker
Performance Depends on the Panel
The source material is a product-focused report, not an independent comparative test. It does not establish how quickly the TS1 cuts different siding brands, how long its blades last in typical DIY use, or how its results compare with other attachments under the same conditions. The Home Depot ratings cited by Hunker are customer reviews; the article notes that only one reviewer specifically mentioned cutting vinyl.
Performance on corrugated siding is also not settled for every panel. Hunker says users may widen the jaws to handle corrugations, then return them to a narrower setting for long cuts in flat vinyl. The report does not provide a tested range of panel profiles or explain how much adjustment will be needed for particular products.
Check the Material Before Cutting
Anyone considering the TS1 should compare the tool’s specifications with the siding profile and thickness they need to cut, and confirm the drill or impact driver is compatible. For ribbed sections, the report recommends adjusting the jaws wider and setting them back for long cuts in flat vinyl. Users should also account for the left-cut direction and whether they need Malco’s optional clamp.
Hunker’s report does not announce a product change or a new test. The practical next step is a small test cut on scrap material, following the manufacturer’s instructions and keeping hands clear of the cutting jaws. For thicker vinyl, flooring or demanding corrugated work, buyers may need a tool designed for that material rather than assuming the TS1 will handle it.
Key Questions
Can the Malco TS1 cut vinyl siding?
Hunker reports that the TS1 can cut most vinyl siding and says it can make curved and square cuts. The article also identifies limits with some ribbed panels and thicker materials.
Can it cut vinyl plank flooring?
Hunker says the TS1 is not suited to vinyl plank flooring. The report compares the flooring’s minimum cited thickness of 2 millimeters with the attachment’s capacity and says it is beyond the tool’s specification.
How much does the TS1 cost?
The Hunker report lists the TS1 at $69.98. It says Malco’s optional drill clamp costs about $30, so the total may be higher if the clamp is needed.
Does the attachment cut in both directions?
No. Hunker says Malco specifies straight cuts and cuts to the left. The report says users can flip the vinyl workpiece to approach a cut from the opposite direction.
Is it a better choice than a utility knife?
It may be more useful for curves and repeated cuts, according to Hunker, while a utility knife remains suited to straight cuts against a guide. Which tool makes sense depends on the project, material and how often powered shears will be used.
Source: hunker.com
